Month: May 2023

Pump head and pump assembly compatible Linx 8900 CIJ printer available. Please feel free to drop us an inquiry.

As motor seldom goes wrong, a pump head probably meets all your need. However if you are not sure whether the motor is working or not, and prefer to buy a whole set pump head with motor, we got it too.

When you install a crack board, and your printer shows this, it’s easy leads to the thought that there is something wrong with the crack board. Because everything seems alright, except the ink bar is empty.

However, in this case, the inkcore board actually works fine, as it can read the ink and solvent model MB175 and J188. So the rest of the work should be focused on why the ink can’t go through the printer. Do the filters, pumps and valves work properly?

Apart from a failing crack board, which seldom happens, there are many parts that may cause the MI printer stop working. So before blaming the crack board, we need to have a look at the printer is it can read the ink and solvent model, if yes, we need to spend extra time to find out the real problem.

Of course we are always happy to help find out the problem together, if you have any questions, please feel free to contat us.

Pump head compatible to Linx 8900 available now. If you are looking for a cost-effective compatible 8900 pump head, please feel free to drop us an inquiry.

Other spare parts and liquids compatible to Linx 8900 Available too.

We seldom actively promote our compatible spare part for Hitachi continuous inkjet printer. Today we are going to present our ink and solvent cartridges compatible to Hitachi UX cij printer.

These empty cartridges are as plain as you can see in above pictures. The volume of ink cartridge is of 500ml whilst the solvent cartridge with 800ml volume. If you are maintanencing a Hitachi UX, you may need the cartridges.

Apart from UX cartridges, we also have filters, touch screens, sensors for Hitachi older printer models, such as PX, PB, PXR, RX etc. Since Hitachi continuous inkjet printers are able to work for more than 15 years, we will keep all old model spare parts available.

If you have any questions, please feel free to contact us.

Hitachi continuous inkjet printer seldom goes wrong, so when there is something wrong with it, we normally just replace a whole part instead of trying to repair it.

The most often repairable Hitachi CIJ printer part is the pump. When it leaks, we usually replace a new pump, but we could try a cost-wise way to repair it first, by replacing the pump membrane.

Please feel free to contact if you have further question.