When you receive our refurbished inkcore, it may have one or two problems. Don’t worry, most of the problems are minor and caused during the bumping transportation, only small checkings will fix them.
I get a feedback from my customer Tom recently, he told me that the newly arrived 1520 inkcore isn’t working, there is no reading from the pressure pump, then he replaced another pump, the problem remains. It seems tricky, but actually, all we need to do is to check two spare parts.
- Check the inkcore board. To see if it’s properly wired.
2. Check the pressure transducer
If all the tubes on inkcore board are correctly connected, then we have to look at the pressure transducer. As you can see in Tom’s case, the pressure transducer is cover in ink, the problem is most likely lying here. Tom freed the pressure transducer out by gently move it from right to left little by little, then cleaned it with solvent. We can see there is a small damage on the transducer, which fails to send the pressure pump data to main board. After we replace the pressure transducer, the refurbished 1520 inkcore works again.
Refurbished Videojet inkcore may suffer from all sort of small problems during transportation, such as sealing parts come off and leads to ink leakage, the connection on inkcore board gets loosen, all these we can fix it easliy. When we comes to the more complicated problem, we could try to fix it by replacing another part or return the inkcore to us, we will send you another one or refund it.
Please feel free to contact us if you have any further questions.
L&S CIJ Codification Parts 