L&S CIJ Codification Parts

Instantaneous hot pliers sealing machines in stock on sale. Sealing length from 300mm to 600mm.

Easy to hold pliers with visual sealing time display, adjustable impluse sealing time with bi-active sealing design, suitable for aluminum foil, nylon lamilated film and paper composite film etc up to 5mm thick.

Model	CY-300	CY-400	CY-500	CY-600
Voltage	220Vac/50~60Hz	220Vac/50~60Hz	220Vac/50~60Hz	220Vac/50~60Hz
Output Power	500w	550w	600w	650w
Sealing Thickness	5mm	5mm	5mm	5mm
Sealing Length	310mm	410mm	510mm	610mm
Controller Size	260*130*210mm	260*130*210mm	260*130*210mm	260*130*210mm
Plier Size	355*220*130mm	455*220*130mm	555*220*130mm	655*220*130mm
Net Weight	4.5kg	5kg	5.5kg	6kg
Gross Weight	6kg	6.5kg	7kg	7.5kg

Compatible 8900 pump with and without motor available now.

Here are some of the technical parameters:

Voltage: 24V dc; 1500rpm, Pressure: 1.5~2Pa

If you can’t tell whether your motor is working or not, we can place our ears close to the pump when it’s working, if we can hear a gentle motor buzzing sound, then it’s fine.

We also supply compatible 8900 RFID, serivce module, filter kits etc, please feel free to drop us an inquiry.

What’s the quickies way to fix a leaking compatible Markem Imaje ENM5629 pressure pump? Contact your supplier for a new replacement? Yes this could do, but while you are waiting for a replacement, the quickies way to fix the leaking pressure pump is to do it yourself.

We have all the pumps tested before delivery, however, sometimes I do get feedback about pump leakage. The problem often lies in bad sealing between the nut and the pump, therefore air goes in the pump and results to the ink leakage.

To fix this problem, we could use PTFE tape to wrap up the nut a little, and then put it back to the pump. With the PTFFE tape to increase the contact area, it can prevent air goes in the pump.

Pump head and pump assembly compatible Linx 8900 CIJ printer available. Please feel free to drop us an inquiry.

As motor seldom goes wrong, a pump head probably meets all your need. However if you are not sure whether the motor is working or not, and prefer to buy a whole set pump head with motor, we got it too.

When you install a crack board, and your printer shows this, it’s easy leads to the thought that there is something wrong with the crack board. Because everything seems alright, except the ink bar is empty.

However, in this case, the inkcore board actually works fine, as it can read the ink and solvent model MB175 and J188. So the rest of the work should be focused on why the ink can’t go through the printer. Do the filters, pumps and valves work properly?

Apart from a failing crack board, which seldom happens, there are many parts that may cause the MI printer stop working. So before blaming the crack board, we need to have a look at the printer is it can read the ink and solvent model, if yes, we need to spend extra time to find out the real problem.

Of course we are always happy to help find out the problem together, if you have any questions, please feel free to contat us.

Pump head compatible to Linx 8900 available now. If you are looking for a cost-effective compatible 8900 pump head, please feel free to drop us an inquiry.

Other spare parts and liquids compatible to Linx 8900 Available too.

We seldom actively promote our compatible spare part for Hitachi continuous inkjet printer. Today we are going to present our ink and solvent cartridges compatible to Hitachi UX cij printer.

These empty cartridges are as plain as you can see in above pictures. The volume of ink cartridge is of 500ml whilst the solvent cartridge with 800ml volume. If you are maintanencing a Hitachi UX, you may need the cartridges.

Apart from UX cartridges, we also have filters, touch screens, sensors for Hitachi older printer models, such as PX, PB, PXR, RX etc. Since Hitachi continuous inkjet printers are able to work for more than 15 years, we will keep all old model spare parts available.

If you have any questions, please feel free to contact us.

Hitachi continuous inkjet printer seldom goes wrong, so when there is something wrong with it, we normally just replace a whole part instead of trying to repair it.

The most often repairable Hitachi CIJ printer part is the pump. When it leaks, we usually replace a new pump, but we could try a cost-wise way to repair it first, by replacing the pump membrane.

Please feel free to contact if you have further question.

Apart from standard black ink, we also manufacture color pigment compatible Markem Imaje/Linx continuous inkjet printer, with formula specialized to certain material such as PE, PVC, PP. From soft electric wire to hard PVC water tube, we have adjusted pigment formula specifically cater to them, so that you could have a better printing experience to your items.

You may wonder at some point, here are the most often asked questions that may help you.

1. Can I continue to use the original solvent with your compatible ink

Yes, you can. You can pair our compatible ink with original solvent, or with our compatible one.

• Can I add your compatible ink on the original one directly

You’d better not. Please replace a different kind of ink after proper cleaning the printer.

• Will your ink have a strong smell

Not really, there is odor, but not penetrating smell.

• How long does it take for the pigment to dry up

About 3~5 seconds

• Will the compatible pigment do harm to my printer

No, after proper cleaning the printer before replacing the compatible pigment, it works just fine.

• Can I see the printing effect before purchasing

Yes, we can show you the printing effect in our workshop.

Do we have compatible ink and make up for Hitachi, yes we have, but we don’t have the RFID, which is necessary to pair with the liqudis, or else the printer won’t accept the ink nor make up.

We also have empty cartridges compatible to Hitachi. If you are instersted, please feel free to drop us an inquiry.