Month: April 2020

One of my clients complains that the refurbished Videojet ink core he bought from me was broken, and the ink was spitting. So I ask him to send me a picture of how the Videojet ink core was leaking, that we can see if we could offer guidance to repair on site.

From the picture, we notice that there is a missing part, which is vital for the leakage because it contains sealing ring in it. This is the connector for Videojet 1000 series ink core, which perfectly covers the circled area.

After replacing the Videojet ink core, please don’t forget to install this part, it’s small but important.

Apart from forgetting to install the sealing part, there is another reason that may lead to ink leakage, the leakage in tube, which takes more work to fix it. We need to recycle the good tubes from old ink core, and then apply them on the replacement. Please check on below videos of how to recycle the tubes.

Any questions, please feel free to contact us. 

You may notice that the price of compatible ENM5675 Cannon Holder in our store is higher than other suppliers. Well, don’t jump to the conclusion that we over charge you right away, in fact, if you look close at our product picture, you will find where lies the price gap.

First, the most obvious difference in our ENM5675 is that it’s a kit, not just a Cannon Holder, which comes with a small screw driver, same as the original Markem Imaje ENM5675. Besides, the small screw accessories are made of metal, instead of fragile plastic. It provides extra strength for the holder.

So are we clear now? Any questions, please feel free to contact us.

“My client sends me this picture, so I want the exact same Imaje surface plate “. Ok, no problem, if you want the longer type of Imaje surface plate, you got the long type surface plate, but they actually work the same.

These two types of compatible Markem Imaje surface plate are actually same, with same function and same price, but with different appearance. If you have been installing the shorter type and find it suits you, or if your client insists nothing change, order the same long type plate as usual, either way will be fine. We have sufficient stock for both Imaje surface plates.

For further inquiry about this surface plate, please fill in below contact form, we will reply you asap.

Our Markem Imaje RFID life span is between 12 and 18 months.

As far as our compatible liquids speaking, the ink & solvent can work for up to 24 months, but performance will be greatly reduced after 15 months. Better use up the liquids within a-year’s time.

Please feel free to let us know your ink & solvent number, we will check if we have the compatible RFID for it.