Month: June 2021

Plastic tube works as special high way for ink & make up, to deliver them from liquid tank or reservoir to another part of the inkjet printer system. It seldom goes wrong, but when you need to replace the tube, please noted that there are two types of tube with different diameter, one of 1/2” the other of 3/4”. Or you could take a picture of your printer ink system and point out which section of tube you are going to replace, we will send you the right size tubes.

Any questions, please feel free to contact us.

Recently there is a client tells me that the compatible IM0001 membrane was torn apart after a few days use, he is not happy about it and ask for more expensive one with higher quality.

I am totally confident about our pump membrane because it’s produced in our workshop and I know we use imported material to make it. Besides, no other complains about IM0001 has ever been filed before. I mean, it’s not as good as original, but not as bad as go straight faulty after a week.

So I ask my client to take a picture of the torn apart membrane, and our technician gives answer. For a good condition central cylinder, the edge should be round and smooth. However, after grinding for a long period, the round surface slowly turns into square, which will pierce out the membrane. So if you install the IM0001 pump membrane on your 9020/9040 properly , but it still breaks down a few days, the problem probably lies in the central cylinder.

If you have any questions about Markem Imaje small character inkjet printer spare parts, please feel free to contact us.

We have newly launched our compatible Hitachi Ux continuous inkjet printer empty ink & solvent cartridges. The molds are tested and 100% compatible. Apart from compatible cartridges for the new Hitachi CIJ printer, we also continue to provide the compatible classic 1 liter empty cartridge for ink and solvent. Please feel free to contact for more cartridges info.

We also supply compatible Hitachi spare parts such as pump membrane, filter, valves, tanks etc.

From time to time we receive clients’ feedback that asking us to fill up the bottle with make up or ink. “You see there is still room for more liquid, please top it up in next order.” We could top up the bottle, but we actually leave some room in the bottle on purpose. For the solvent and make up contain volatile liquids, when heated up, they transform to gas and volume expands, which leads to increasing pressure inside the bottle and maybe explosion in the end. So for safety sake, we spare some room to buffer the increasing pressure.

• 

• 

So if you have the same question about why the Markem Imaje/Domino/Linx/Videojet ink & make up is around 85% fill up, safety is reason why. Please feel free to contact us if you have more questions regarding CIJ printer liquids.