L&S CIJ Codification Parts

Do you buy a new Markem Imaje 9450 printer after October 2023, if so, you may need our new compatible A40989 filter kit, which suits the new configuration of the 9450 printer made after Oct 2023.

Apart from the ENM34410 moduled filter, the rest of air filters, main filters are the same. Both A40989 filter kit for MI 9450 printer before and after Oct 2023 cost the same. For more info, please feel free to contact us.

Are you troubled by the password to re-set your Linx 5900 printer service hour? Worry not, with our unicorn chip, you can easily by pass the password and reset the service hour by yourself.

Here are the few steps to install the unicorn chip and re-set your printer.

If your printer is with 13 digit PRC code, we could refresh the main board by either setting up the parameters directly, or by USB.

1. Turn off the printer

2. Install the Unicorn chip

3. Discharge for 5 mins(plug off the line LK4 on the main board)

4. Turn on the printer, set up language

5. Enter password 90716696, the rim of the screen turns red

6. manu-setup-printhead-printhead type-printhead code-ink model-set up code ID(KXLMP9-AEYHMV-MMT9J4-8NKYLK)-set up service time 6000 hours

7. Set up printer time and date.The red rim disappears.

If your printer is with 20 digit PRC code, we need to use the USB to refresh the main board after discharge, and the service hours will be 2000 hours. 

1. Turn off the printer

2. Install the Unicorn chip

3. Discharge for 5 mins(plug off the line LK4 on the main board)

4. Turn on the printer, set up language

5. Enter password ADMIN

6. USB-Restore printer data from USB

7. Set up printer time and date.

As you may need the schedule maintenance kit code to reset the service hours, please feel free to let us know, we will provide the code for free.

If you store loads of info in your printer, please back up the info first. Here is a video of how to set up the Linx 5900 after installing the unicorn chip. For more info, please feel free to contact us.

Our most hot sale compatible Videojet parts are countdown chips, especially V410-D and V705-D chips, followed by V411-D and V706-D chips. As more customers apply printer 1280 and 1580, more compatible service module chips are sold too.

Apart from the most common V410-D and V705-D countdown chip, we also carry chips of other ink and make up model, all of them with 2 years life span, guaranteed. Please let us know the consumable model you are applying now, we will program the chips accordingly.

Do we have 1.1G printhead for Markem Imaje 9040 printer? Surely we have the ENR35370 1.1G 3 meter printheads in stock. Please kindly refer to the picture and video below.

We refurbished the used printheads and make them work again. All of the printheads will be tested and cleaned properly before delivery. The standard ENR35370 printhead is with a 3 meter umbilical, if you need a 5 meter long one, please give us a headsup.

Apart from 1.1G printhead for Markem Imaje, we also have 1.2G and 2.1G refurbished printheads, which are not always in stock and cost higher than 1.1G ENR35370.

If you are interested, please feel free to drop us an inquiry.

The compatible cap for Videojet & Markem Imaje we used to provide is made of one aluminum cap, and a rubber, which is good & cost-effective in most circumstances, but for some demanding clients, they are not good enough.

A client feedback that the cap leads to leakage, the problem lies in the rubber. So we decide to make a better cap to replace the old one. There are two color for the better quality cap, one of bronze and the other of chrome. The main difference lies in the rubber, we have the rubber raw material improved to make it more chemical resistant. Therefore the chance of leakage will be reduced greatly.

However, the better quality cap comes with higher price, it costs 1.5 times more expensive than the old one, but it definitely worth the extra money. Please feel free to contact us for more info.

We have TTO and hot stamp ribbons too. Compatible ribbons of various width and length, wax, resin or near edge wax ink available. Please kindly let us know on what material you are going to print on, we will recommend the right ribbon to you. You could send us a picture of the ribbon you are applying now with the label on it, we will know what kind of ribbon it is. 🙂

O-rings are similar are they, which one should I buy for my Domino A100 printer? Don’t worry, let me make a portfolio of all the o-rings compatible to Domino A series CIJ printer.

The first one on top left is DB06035, which is for 64k drive rod. The second one on top right is DB04150, suitable to venturi tube. The two o-rings at the bottom, DB04183 and DM-PY0097 are for pressure transducer and solenoid valve.

It’s difficult to tell your supplier the diameter, thickness of the O-ring you are looking for, but, if you can tell us on which spare part it’s used on, we can quote and deliver the right O-ring to you asap.

If you have any questions about the O-rings, please feel free to contact us.

Apart from the regular standard black ink such as Domino MC-270BK/IC-2BK006, Makem Imaje MB175, Linx 1240, Hitachi JP-K67/JP-K72, Videojet V410 etc, we manufacture other sort of special ink too, like colour pigment for wires, high adhesive ink for PV bags or PVC tubes, UV to blue ink for food industrial…

If you are looking for a special ink, please kindly let us know on what material the ink is going to be applied, or in which industry you are using such ink, we will recommend a suitable, cost effective and compatible ink to you.