December 2022 – L&S CIJ Codification Parts

Reliable Compatible M6 Module

2022年12月26日2021年11月17日 Connie YangLeave a comment

We’ve been selling the compatible Markem Imaje M6 module for a year now, they work well and so far no complaint is filed. Here is the testing vidoe of our compatible MI M6.

Compare to refurbished M6, a compatible one will not suffer from ink leakage problem during transportation, also it arrives clean and without potential ink clots.

We have 9018 and 9028 compatible M6 module with 6000 working hours. If you are not certain whether our M6 compatible to your MI printer, please feel free to tell us your printer model or send us a picture of your printer, we will figure out if we should send you a compatible, or refurbished M6 that suits your printer.

For more info, please feel free to contact us.

Go back

Your message has been sent

We Wish You Merry Christmas & a Happy New Year

2022年12月19日2022年1月27日 Connie YangLeave a comment

How Time flies, 2023 is in the corner now. We sincerely thank you for your support all year round and hope our good faith will continue in the following years to come.

In this jolly season, we wish you merry Christmas and a happy, healthy, prosperous new year. Woohoo.

Go back

Your message has been sent

Exclusive Tips for Refurbished Printhead Purchase

2022年12月12日2021年10月29日 Connie Yang1 Comment

Refurbished parts are always tricky, especially those with more than one gadgets in it. Take a refurbished printhead for example, there are tube, valve, filter in it, if we don’t check them one by one clearly, we may end up with a printhead with minor defect.

Here are two exclusive tips that you will find helpful when purchase a refurbished printhead. Let’s start with something easy first.

The printhead filter. For some reason, this printhead filter is easy to be pierced off. We have to take a close look at it.

Then comes the more advanced part, the valve. We have to open the valve and check if the inner core is there. You may wonder how could the valve core be missing, I share the question with you. I don’t know why this happen, but it happened before, so despite we need to make some effort to open the valve, it’s all worth to exam this part.

Last but not least, some of you may need the 3 way connector, it’s not part of the printhead, but we will send it along with the refurbished printhead if you need it.

Hope you will find these three little tips helpful.

If you are interested in our refurbished Markem Imaje, Linx printhead, or have any questions in mind, please feel free to contact us.

Go back

Your message has been sent

Where to Plug the MI Crack Board in

2022年12月5日2021年10月16日 Connie YangLeave a comment

We have talked about the compatible Markem Imaje crack board before, such as how to adjust the printer time when the crack board expired(just turn back time setting to 2 years ago, it will work again), and how to purchase the correct crack board for your printer(we need to know your printer model, software version and for which type of ink).

Today we address one simple yet important aspect about the crack board, where to install it.

wrong board to plug the crack board in — Here is an example of how you may plug it in the wrong board.

We should plug the crack board here — The correct connection point should be there.

If we connect the crack board incorrectly, nothing happens on the printer which may leads you to think the crack board goes faulty. Before jumping to this conclusion, please kindly check if you have plug in the right place.

Any further questions about the Markem Imaje crack board, please feel free to contact us.

Go back