Author: Connie Yang

Does your continuous inkjet printer come with a stand? No? Never mind, we got the stands suitable for printers such as Linx, Markem Imaje, Videojet, Domino, Hitachi, Fastjet etc.

You could choose stand with sensor, stand or part of the stand. Let us know what do you need and we will quote to you asap.

There are many alike-looking spare parts in continous inkjet printers, cables, plugs, filters with different micron etc. In this case, a picture worths thousand words, if we don’t have a part number to pin-point which spare part we are looking for.

Our customer Jack sent us some pictures of a cable last week. It’s for his Domino A series printer, which connects the RS232 board and a connector. Wish such description, we are still not quite sure which cable shall we send to Jack. Then Jack sent us pictures of the cable, which connects a RS232 at one end, and a 8-hole plug at the other end. Then we knew Jack was looking for a DB37738 Alarm Lamp Cable.

Sometimes it’s difficult to look for a spare part if we don’t know its part number, but with printer model, where the part applied and better picture of the part, we will manage to deliver the right printer parts to you.

When the Videojet printer shows no good phasing alarm, what should we do. Don’t worry, let’s have a look at the printhead engine module(399422 60um for standard black ink).

Usually it’s the printhead engine module goes faulty. We could have it washed, or replace a new one.

If the problem remains, please show us the alarm info, let’s proceed to the next step.

There are two different main filters compatible to Alphajet and Metronic CIJ printer, which look very similar to each other. In fact, if we don’t circle the extra outlet in green, hardly will anyone notice the difference until they start to install the filters.

Why we talk about these filters? Because we’ve mixed them up before. To avoid the confusion, I think why not list the two filters here and let’s get them straight once and for all.

Both main filters can be installed in the printer, the way to install them is different. So when you order a main filter for your Alphajet or Metronic CIJ printer, better have a look at your old filter and take a picture of it, then we will know which one you are looking for.

We don’t have much Alphajet nor Metronic here, so when you say I need an Alphajet main filter, we assume that you are asking for the commonly used one, which is the one on left. Then when you install the filter, you may find an outlet is missing. Now snice we know there are two different types of main filters, we know how to order the one we want.

If you have any further question or inquiry, please feel free to contact us.

New Arrival!

Alternative Videojet 1280/1580 ink and make up are ready now. If you need the cartridge and chip(no need to pair with crack board) only, they are available too.

V4210/V7205 and V4211/V7206 ink and make up are most frequently asked, please feel free to drop us an inquiry if you need other type of ink and makeup.

When do I need to replace the filter kit? Depending on how often and how long you run your printer per week, we should replace a new set of filters, or some of the filters on regular basis. If your printer runs non-stop most of the time, we shall change a new filter kit every 2 to 3 months; If it runs from time to time, we could take a look at the condition of the filters and decide when to replace which filter.

We carry filter kits compatible to Linx, Domino, Videojet, Willett, Markem Imaje, Fastjet, Hitachi, Alphajet etc. If you are not sure the filter part number, please kindly send us pictures of the filter you are looking for and let me know on which printer model it’s on, we will quote with our filter’s picture.

For more info, please feel free to contact us.

Good news, we have newly be able to provide alternative Videojet 1580/1280 ink and makeup chips that can work on their own, no crack board needed anymore. V4210/V7205, V4211/V7206 chips work without any problem. Please feel free to let us know which ink and makeup model do you need, we will check if we have the chips.

As the new chips costs slightly higher, if your printer works 24/7 and consumes quite a lot liquids, we’d better install a crack board and pair with the old model alternative chip, which saves more in the long run.

However, if your printer only works from time to time, and consume little liquids, please purchase the new model chip, it costs a little higher, but can last for a while.

If you want to purchase V4210/V4211, V7205/V7206 ink and solvent, we can provide them too. Delivery fee for liquids costs higher, please kindly let me know quantity, I will quote with delivery fee altogether.

Please feel free to drop us an inquiry.

It’s difficult to tell the size of a compatible cap by looking at a picture. You may wonder, will this compatible cap fits my bottle? I can’t risk to deliver loads of non-useful caps to me, but it takes time to test the sample first and then arrange the second shipment. What a dilemma.

Don’t worry, we can send you pictures with close-up detail and measurements. Take a look at the pictures below. I think we are clear now. 🙂

Please feel free to drop us an inquiry if you have any questions or inquiries.

Tubes are obscure, we seldom notice them, but it doesn’t mean that we don’t need to replace a new tube once there is leaks or other problems.

We carry different size of tubes compatible to Linx, Domino, Markem Imaje, Videojet etc. Please let us know the part number, or tell us what the tube connects, we will send the right tube to you.

So far we have sold ENM3434 PTFE tube, DM-PG0021 ink tube etc. Please feel free to drop us an inquiry.

Are you looking for original new continuous inkjet printer spare parts? Wonder if we carry original new parts too? Yes we do.

Apart from compatible filters, chips and tags, liquids, we supply original new/refurbished parts for Domino, Linx, Videojet, Markem Imaje, Hitachi CIJ printers.

Most of my clients are fine with our compatible filters, service modules, keyboard membrane, pump heads, nozzles, but some of them still prefer original new electrovalves, nozzles, printheads, main boards…It’s like oranges and apples, compatible parts are cost-effective, while delicate original parts(nozzles, valves for example) are more robust.

No matter you prefer compatible or original parts, please feel free to drop us an inquiry, we will quote asap.