Month: October 2020

Hi Connie, I’ve installed a new mainboard in my Markem Imaje 9040 printer, then the LCD & the fan stop working anymore, does it mean there is something wrong with the mainboard, would you please quote a refurbished one to me?

• 

No rush my friend. Don’t sentence the mainboard so fast, it may just has some communication issues with the connection board, since it belongs to another printer before.

It’s like connecting your TV set with a new remote control, you have to build a bridge to enable them to understand with each other, then you can switch channels with the new remote control. Likewise, when you install a refurbished mainboard to another printer, you have to teach/program it to speak the same languague with the printer, only after that can the mainboard sends directions without any languague barrier.

So how could we build the communication bridge? Firstable we need a USB that come with the printer, then save the printing matrix info, and now we can start to refresh the printer system by the program inside the USB. Simple right.

If I haven’t explained this detail enough, or you wonder what’s the program, please feel free to contact us. It can save some dollars if we just need to fix the boards straight, instead of buy a new one.

This is a sequence post of my last post What If the White Pigment Markem Imaje Shows No Pressure.

The thing is, after my client, let’s call him A, told me that the pump was no long working, we sent a new one to him and he was kind enough to send back the faulty white pigment pump to us, for our technician wanted to check the pump by himself to see where went wrong. Suprisingly, the pump worked perfectly when we tested it on our Markem Imaje printer. So it remains a unsolved mistery why it didn’t work on my client’s printer.

Then last Friday, A told me the pump went faulty again. 😦 I feel awkward since I really don’t know why the new pump goes wrong, and the problem may not lies on the pump. So I asked our technician is there any potential problems that A can check on site? Above picture is the answer.

The gap between the flange & the magnetic range(sorry for not giving the technical name of these two parts, but you know what I mean, right) should be 3.5cm. You could try fix the hight of the gap and check if the magnetic range is properly installed.

If you already purchased from us, or are going to purchase a pump for Markem Imaje white pigment CIJ printer, please feel free to contact if you have any questions.

Are you a technician working on continuous inkjet printers like Domino, Linx, Videojet, Markem Imaje, etc? If yes, what’s your most un-wanted scenarios? Nozzles’ blocking, pumps’ failing, filters’ oozing ink etc. With the right tools, you could work much easier & earn more.

Give a shot to our compatible CIJ spare parts, they are 100% compatible & not compromise in quality. All of them are tested before launching to market, you don’t have to worry about being called back to repair the printer suddently while drinking beer at Friday afternoon. Besides, you could save up more money with the compatible parts, which work the same as original parts, but at a much more user-friendly price.

Try our compatible CIJ spare parts, you won’t regret the choice. See how other clients commented on our products & service.