L&S CIJ Codification Parts

If you have purchased the compatible Linx 8900 ink or solvent empty cartridges, then you also need a clamp to help you tighten up the caps. Can we use the one for tight up Videojet or Imaje cartridges, sorry, we can’t. The clamp for Linx 8900 cartridges is with bigger diameter, which matches with the caps. Likewise to the clamp for Videojet/Imaje cartridges, this fits a smaller cap size.

You could tell the difference easily by have a look at below pictures.

Please feel free to contact us if you have any inquiry or further questions.

Last week my client David told me that the 1240 RFID doesn’t work on his new printer, he tried three other tags, but still failed. The RFIDs are still within expire date, and I’m sure that the program is properly written in the tags, so they should be working fine.

As usual procedure, I asked David if he can send me some pictures, so he did. Then we found out where the problem lies, it’s a new printer with 5.3 version software, the RFIDs we sold to David last year were not so advanced to work on the newest software, but not anymore.

We’ve figured out the 5.3 version software last month and tested the compatible tags for a few days. Now we are sure to launch the RFId tags compatible to Linx 8900 CIJ 5.3 version software. In fact, all the compatible Linx 8900 ink and solvent RFID we sell will work on the newest 5.3 version, and price will be the same.

Please feel free to contact us if you have further questions.

We have compatible ribbon for Videojet now, please feel free to drop an inquiry. There are two different sizes, one of 25*500mm, and the other of 30*600mm.

So far the ribbons work fine, we’ve recieved positive feedback from our clients, and the sales performace is getting better.

You may be hesitate to switch to another compatible ribbon, but give us a chance, we won’t disappoint you. Contact us now.

The electrovalve for Markem Imaje continuous inkjet printer is delicate. To be very frank, our compatible ENM5044 electrovalve doesn’t perform as smooth as the original ones, which leads to complaint & replacement from time to time. Some clients prefer to purchase the original one, despite the original ENM5044 costs 4 times higher than the compatible one. However, for other clients, cost-effective compatible CIJ spare parts are still their first choice.

Up until now, we have to either spend a fortune to purchase the original ENM5044 electrovalve, or to put up with the less satisfied compatible one. Good news is we finally launch a better quality ENM5044 to market this week. We apply finer material to produce the inner parts of the electrovalve, after a few times test & development, we are able introduce this better option of ENM5044 to you which costs higher than the previous compatible one though.

If you are interested in this better ENM5044 electrovalve, please feel free to contact us.

An original A40846 maintenance kit can cost you an arm and an leg, but if we do-it-yourself, we could save some dollars.

What we need is an orignal A40988 draining and rinsing kit, a compatible pump head for 9450 and a A40989 filter kit.

There is one small thing we need to pay attention to, that is the pressure pump head, despite the 9040 and 9450 pressure pump heads look similar and cost the same, they are however incompatible. Please make sure that you are in need of a 9450 pressure pump head.

For more information, please feel free to drop us an inquiry.

Are you ready to take a deeper look at your continuous printer?

Dave is a CIJ printer tech, who is keen on disassembling the spare parts for years. In December he sent me a picture of a M6 and asked if I can provide the pumps in white circles.

Surely we can. We have informed our clients that we tested and launched the compatible M6, which means we definetly have necessary compatible parts to build a Markem Imaje M6 module. I think Dave must catch this news and start to figure the M6 by his own.

Here are the pumps we sent to Dave, of course we sent along the compatible M6 RFID for 9028.

If you have time and energy to disassemble your Domino, Linx, Videojet, Markem Imaje, Citronix printers and have a look, and are willing to fix the parts by yourself, we may be able to help with providing the affordable and reliable compatible spare parts, original CIJ printer spare parts are also available too, but price is higher, probably cost the same if you purchase from local.

If you are going to crack on your CIJ printer, please feel free to contact us.

Here are the hot sale parts of Domino Ax series.

1. This is the original ink service module with RFID and our compatible RFID. So far we are not able to make a Ax ink cube yet, however, if you are applying black ink, and your ink module works fine, you could just purchase our RFID, it will give extra service hours to the ink cube. When you order the RFID, please take a look at the label on your ink cube, is it ITM02, 06 or 09? The program is slightly different.

2. Here is the compatible ink and solvent cartridge with caps, also the ink and solvent RFID. One small thing, as we only have some ink/solvent models’ RFID, so please kindly let us know the ink/solvent model you are using now before order.

3. Finally comes the compatible solvent service module which doesn’t require a RFID to work with. It’s just a plain service module, nothing special about it, you could buy it without asking any questions.

Apart from these parts above, we have compatible Ax pump head, filter, pump repair service kit etc, please feel free to drop us an inquiry.

I’m talking about the compatible Markem Imaje M6 RFID for 9018 and 9028 model, which is with 6000 hours service time. If your M6 works perfectly and the only problem is it runs out of time, then our compatible M6 RFID is right there to help. By purchasing a compatible M6 RFID, we could save some delivery too, for a M6 module weight at least 2kg.

If you are interested in our M6 RFID, or any other RFID for ink and solvent, please feel free to drop us an inquiry.

When you order an A40989 comptible air filter kit, do you really look into it, what filters are in this kit? Let’s take a close look here.

Markem Imaje A40989 filter kit consists of 5 pieces of filters.

1. ENM1913 Main ink filter (color black)
2. ENM40786 Main ink filter (color white)
3. ENM25683 Head filter
4. ENM40830 Air filter foam IP54 (square)
5. A36022/PC1572 Air filter kit

Tips: both Markem Imaje 9232 & 9450 model need A40989 air filter kit, but there is slight differnce lies in the ENM1913 main ink filter. For more info, please feel free to contact us.

Last week, a client of mine asked me if we have the power supply as below picture shows. I replied with little suprise, isn’t it the compatible 37758 power supply for Domino A serie? But no, it’s a power supply for Docod CIJ printer.

It turns out that we do have this power unit for Docode printer. These power supplies look alike, but the voltages are different. So if you are looking for compatible spare parts for Fastjet, ECjet and Docode, please feel free to drop us an inquiry.