L&S CIJ Codification Parts

Hitachi continuous inkjet printer is very robustness, seldom do we need to replace new spare parts for it. One of the mostly sold spare parts is the MV9 valve, apart from the pump membrane & main filter. We have two options for you if you are going to buy a Hitachi MV9 valve, one is original new, which costs a little bit more expensive, and I think it costs the same if you purchase from local Hitachi CIJ printer dealer; the other one is original refurbished, it’s a second hand spare part, we have it cleaned & tested before putting it on market. Either original new or refurbished Hitachi MV9 works perfectly smoothly. It depends on your budget and personal preference to choose one of them.

Speaking of MV9 valve, the net filter for MV9 is also available too. Please feel free to contact us if you need more info of compatible/original Hitachi CIJ printer spare part/liquids.

Yes you are right, you must have seen this compatible filter kit for Fastjet A400 CIJ printer before, is it actually the same as Willett filter kit PG0076. It’s made up of a main filter, clean filter & pump filter.

All of our compatible filters are tested before launching to market, they cost more user-friendly & perform as well as original ones. Apart from compatible Fastjet filter kit, we also provide alternative filter kits for other continuous inkjet printers, such as Domino, Linx, Markem Maje, Videojet, Citronix, Metronic etc.

Please feel free to contact for more info.

Actually I haven’t given a thought to this questions before, until one day, a potential buyer leaves a comment on my website, asking why the pump membrane costs so dearly, they are simply a sheet of plastic with holes.

I’m intrigued by this comment and ask our tech for an answer. It turns out that the pump membranes are not just a plain sheet of plastic with holes. They are made of plastic material indeed, but not “plain” at all, for starter, the membrane material must be durable enough to withstand constant grinding motion of the pump, and then, it needs to hold the merit of chemical resistance. Now question is clarified, if you have the same questions before, I hope this news will explain clearly why the pump membrane costs so much. They look simple from the outside, but sophisticated inside.

When you just need one filter, say the pre-pump filter from the Videojet filter kit, you don’t have to purchase the whole set, just let us know which filter do you need, then we will ship it to you.

We could, of course, sell the compatible filters separately, or sell them as a whole set, either way it is fine with us. However, generally speaking, you will spend less if you purchase a whole set of filters, because we have special combo offer for it, we will round it up maybe 2~3 dollars.

Apart from the compatible Videojet filters kits, we also have sets of filter for Domino, Markem Imaje, Linx, Willett, Fastjet etc. Please feel free to let us know which filter or filter kit you are looking for.

If you were planning to buy an original new Videojet printer 3 months ago, and finally make up your mind to seal the deal today, you will find that the quotaion is no longer valid, price goes up again.

It’s not because of the rate gets worse, nor the delivery fee continues to break its record(though these factors also play a role), but due to a notice sent by our local Videojet distributor, saying that the 1000 series continuous inkjet printers were no long be produced since 31st Jan 2022, and after sales service will not be available after 31st Dec 2026.

Despite the price of original new Videojet 1000 printers and spare parts go up, we could still turn to refurbished original parts, which is not as shiny as the new one, but still, they are in good working condition and price is much much more reasonable. Besides, we know that you may doubt the quality the second hand printers and spare parts, worry not, we will test them before delivery.

If you have any questions, please feel free to contact us.

Domino A320i A420i and A520i don’t need RFID to work with, so we don’t have to know your ink model, your ink cube model, just order and we will deliver.

Below are our compatible i-Tech ink service module, the yellow one, and the solvent service cube, the black one. They are just plain service cube, nothing much to talk about. However, there is one small thing I would like to stress a bit, we pack the cube carefully inside a carton, unless the package undergo very horrific situation, they will arrive safe and sound.

Here comes the compatible ink and solvent cartridges, they are orange. If you want to buy the cap alone, we could sell it seperately.

These are the compatible i-Tech parts that are frequently asked, apart from them, we also have compatible make up filter, pump head, pressure transducer, keyboard membrane etc.

Please feel free to drop us an inquiry.

As we are selling more compatible Linx 8900 RFID tags, comes more questions regarding how long the RFIDs can work? Here we are going to reply it all.

The original Linx 8900 service module RFID gets 8000 working hours in it, if you think that our compatible tags must get less hours, then you are wrong. Our tags contain a suprising 13000 working-hour. The service module RFID tag starts to countdown the day you install it.

For our compatible 8900 ink RFID, it works around 18 months whilest the solvent RFID works around 24 months. These RFID for liquids start to countdown their service time from the day we program them.

Above are our answer to the most frequently asked questions regarding compatible 8900 RFID tags. One more thing, if you are going to order Linx 8900 ink or solvent RFID tags, please let us know your liquid model first, we may or may not have the program for it.

Please feel free to drop us an inquiry.

If you have purchased the compatible Linx 8900 ink or solvent empty cartridges, then you also need a clamp to help you tighten up the caps. Can we use the one for tight up Videojet or Imaje cartridges, sorry, we can’t. The clamp for Linx 8900 cartridges is with bigger diameter, which matches with the caps. Likewise to the clamp for Videojet/Imaje cartridges, this fits a smaller cap size.

You could tell the difference easily by have a look at below pictures.

Please feel free to contact us if you have any inquiry or further questions.

Last week my client David told me that the 1240 RFID doesn’t work on his new printer, he tried three other tags, but still failed. The RFIDs are still within expire date, and I’m sure that the program is properly written in the tags, so they should be working fine.

As usual procedure, I asked David if he can send me some pictures, so he did. Then we found out where the problem lies, it’s a new printer with 5.3 version software, the RFIDs we sold to David last year were not so advanced to work on the newest software, but not anymore.

We’ve figured out the 5.3 version software last month and tested the compatible tags for a few days. Now we are sure to launch the RFId tags compatible to Linx 8900 CIJ 5.3 version software. In fact, all the compatible Linx 8900 ink and solvent RFID we sell will work on the newest 5.3 version, and price will be the same.

Please feel free to contact us if you have further questions.

We have compatible ribbon for Videojet now, please feel free to drop an inquiry. There are two different sizes, one of 25*500mm, and the other of 30*600mm.

So far the ribbons work fine, we’ve recieved positive feedback from our clients, and the sales performace is getting better.

You may be hesitate to switch to another compatible ribbon, but give us a chance, we won’t disappoint you. Contact us now.